IoT Solutions
Explore wide range of cutting-edge IoT Products to find the exact solution to suit your needs
%20copy%201.webp)
Energy Meters
MCU+
Linux Os
MCU+ series is an advanced compact industrial controller based on a 32-bit 454 MHz ARM CPU. With the power of Linux OS, the user can keep application development quick and simplified. MCU+ can take almost any role in remote utility applications such as solar power plants and electricity distribution substations. It combines GPRS/GSM modem, WiFi and Bluetooth, and datalogger in a single device.MCU+ has ethernet and serial communication ports for flexible connectivity to SCADA, field devices and remote control systems.opening the door to a world of connectivity and control.
MCU+
Linux Os
MCU+ series is an advanced compact industrial controller based on a 32-bit 454 MHz ARM CPU. With the power of Linux OS, the user can keep application development quick and simplified. MCU+ can take almost any role in remote utility applications such as solar power plants and electricity distribution substations. It combines GPRS/GSM modem, WiFi and Bluetooth, and datalogger in a single device.MCU+ has ethernet and serial communication ports for flexible connectivity to SCADA, field devices and remote control systems.opening the door to a world of connectivity and control.
PMU
Inavitas PMU (Power Meter Unit) is a new generation network analyzer that measures and enables real time monitoring of energy parameters. Inavitas PMU (Power Meter Unit) monitors up to 5 channel three phase circuits or 15 channel single phase circuits or any combination of single or three phase circuits.This flexibility makes Inavitas PMU perfect for multi-tenant facilities such as distribution substations, office buildings, data centers and shopping malls. The user can monitor all energy parameters in real time and configure current and voltage polarities, transformer ratios and serial communication settings easily via Inavitas PMU user interface software.
SEM
SEM is a compact and highly capable monitoring and control device for commercial, industrial and utility based energy management applications. It supports most of the common industrial communication protocols ( Modbus, IEC104, IEC62056 etc.) as well as those being used for IoT applications (REST, MQTT, CoAP etc.). Owing to its embedded click-on communication board, you can choose any type of media over GSM, Wi-fi, Ethernet, Zigbee or Lora. SEM’s power measurement feature provides monitoring of two three-phase circuits simultaneously with a sampling rate of 3.2kHz. Besides, it has an SD Card option up to 32GB to restore data even if there is a loss of communication. Its embedded and expandable digital inputs and outputs make it very easy to have more information from other communicable devicesopening the door to a world of connectivity and control.
VTU
VTU (Voltage Tracking Unit) is a generation digital input module that provides voltage tracking in single phase or three phase systems. Digital input module has network analyzer specification that provides 4 channel voltage and 3 channel current input on device. In addition to network analyzer and voltage tracking, VTU provides to monitoring of energy parameters of single phase or three phase information that connects. Logical 1 and 0 informations can be set with VTU Configuration Software which voltage range will work. At the same time, power parameter may also be observed which is calculated as real time opening the door to a world of connectivity and control.
MCU
MCU series is a small and compact industrial controller based on a 32-bit 216 MHz ARM CPU. With user-friendly software and hardware, the user can keep application development quick and simplified. MCU can take almost any role in remote utility applications such as solar power plants and electricity distribution substations. It combines GPRS/GSM modem, digital inputs, outputs and datalogger in a single device.Device with built-in 2 digital inputs and outputs and has ethernet and serial communication ports for flexible connectivity to SCADA, field devices and remote control systems.
MCU ++
MCU++ series is an advanced compact industrial controller based on a 32-bit 454 MHz ARM CPU. With the power of Linux OS, the user can keep application development quick and simplified. MCU++ can take almost any role in remote utility applications such as solar power plants and electricity distribution substations. It combines GPRS/GSM modem, WiFi and Bluetooth, also digital inputs, outputs and datalogger in a single device. Device with built-in 2 digital inputs and outputs and has two ethernet and serial communication ports for flexible connectivity to SCADA, field devices and remote control systems.
DIO
DIO (Digital Input/Output) Module can display on/off or 1/0 data for up to 16 channels. Input channels with high impedance reduce the input current and noise immunity is increased through hysteresis. The device has a anti-jumping filter to prevent contact from jumping. The device also has 32 bit change registers and these registers display the level changes in the input channels. DIO (Digital Input/Output) has 8 channels of isolated solid state relay output. Output channels are isolated from each other. The output type can be changed to latch or unlatch output with the specified time. The user can configure input polarities, anti-jumper filter time, serial communication port settings and output latch time easily through DIO user interface. User can also turn the “Test Mode” on the module. All the inputs and outputs are adjustable for site tests in the “Test Mode”.
MDIO
Mini DIO (Digital Input/Output) Module can display on/off or 1/0 data for up to 4 channels. Input channels with high impedance reduce the input current and noise immunity is increased through hysteresis. The device has a anti-jumping filter to prevent contact from jumping. The device also has 32 bit change registers and these registers display the level changes in the input channels. Mini DIO (Digital Input/Output) has 3 channels of isolated solid state relay output. Output channels are isolated from each other. The output type can be changed to latch or unlatch output with the specified time. The user can configure input polarities, anti-jumper filter time, serial communication port settings and output latch time easily through Mini DIO user interface. User can also turn the “Test Mode” on the module. All the inputs and outputs are adjustable for site tests in the “Test Mode”.
ESU 101
ESU 101 is s cost-effective environmental sensor which is also equipped with Infra Red (IR) controller for split-type Air Conditioners. Thanks to its flexible design, ESU 101 has a learning mode which enables the device to be used with almost all split-type ACs. It has an RS-485 interface supporting Modbus/RTU protocol for SCADA applications.
ESU 201
ESU 201 is an advanced environmental sensor which is also equipped with Infra Red (IR) controller for split-type Air Conditioners. Thanks to its flexible design, ESU 201 has a learning mode which enables the device to be used with almost all split-type ACs. In addition, it has low power bluetooth communication protocol, therefore it can be controlled via any device that has bluetooth technology.
MCU+
Linux Os
MCU+ series is an advanced compact industrial controller based on a 32-bit 454 MHz ARM CPU. With the power of Linux OS, the user can keep application development quick and simplified. MCU+ can take almost any role in remote utility applications such as solar power plants and electricity distribution substations. It combines GPRS/GSM modem, WiFi and Bluetooth, and datalogger in a single device.MCU+ has ethernet and serial communication ports for flexible connectivity to SCADA, field devices and remote control systems.opening the door to a world of connectivity and control.
PMU
Inavitas PMU (Power Meter Unit) is a new generation network analyzer that measures and enables real time monitoring of energy parameters. Inavitas PMU (Power Meter Unit) monitors up to 5 channel three phase circuits or 15 channel single phase circuits or any combination of single or three phase circuits.This flexibility makes Inavitas PMU perfect for multi-tenant facilities such as distribution substations, office buildings, data centers and shopping malls. The user can monitor all energy parameters in real time and configure current and voltage polarities, transformer ratios and serial communication settings easily via Inavitas PMU user interface software.
SEM
SEM is a compact and highly capable monitoring and control device for commercial, industrial and utility based energy management applications. It supports most of the common industrial communication protocols ( Modbus, IEC104, IEC62056 etc.) as well as those being used for IoT applications (REST, MQTT, CoAP etc.). Owing to its embedded click-on communication board, you can choose any type of media over GSM, Wi-fi, Ethernet, Zigbee or Lora. SEM’s power measurement feature provides monitoring of two three-phase circuits simultaneously with a sampling rate of 3.2kHz. Besides, it has an SD Card option up to 32GB to restore data even if there is a loss of communication. Its embedded and expandable digital inputs and outputs make it very easy to have more information from other communicable devicesopening the door to a world of connectivity and control.
VTU
VTU (Voltage Tracking Unit) is a generation digital input module that provides voltage tracking in single phase or three phase systems. Digital input module has network analyzer specification that provides 4 channel voltage and 3 channel current input on device. In addition to network analyzer and voltage tracking, VTU provides to monitoring of energy parameters of single phase or three phase information that connects. Logical 1 and 0 informations can be set with VTU Configuration Software which voltage range will work. At the same time, power parameter may also be observed which is calculated as real time opening the door to a world of connectivity and control.
MCU
MCU series is a small and compact industrial controller based on a 32-bit 216 MHz ARM CPU. With user-friendly software and hardware, the user can keep application development quick and simplified. MCU can take almost any role in remote utility applications such as solar power plants and electricity distribution substations. It combines GPRS/GSM modem, digital inputs, outputs and datalogger in a single device.Device with built-in 2 digital inputs and outputs and has ethernet and serial communication ports for flexible connectivity to SCADA, field devices and remote control systems.
MCU ++
MCU++ series is an advanced compact industrial controller based on a 32-bit 454 MHz ARM CPU. With the power of Linux OS, the user can keep application development quick and simplified. MCU++ can take almost any role in remote utility applications such as solar power plants and electricity distribution substations. It combines GPRS/GSM modem, WiFi and Bluetooth, also digital inputs, outputs and datalogger in a single device. Device with built-in 2 digital inputs and outputs and has two ethernet and serial communication ports for flexible connectivity to SCADA, field devices and remote control systems.
DIO
DIO (Digital Input/Output) Module can display on/off or 1/0 data for up to 16 channels. Input channels with high impedance reduce the input current and noise immunity is increased through hysteresis. The device has a anti-jumping filter to prevent contact from jumping. The device also has 32 bit change registers and these registers display the level changes in the input channels. DIO (Digital Input/Output) has 8 channels of isolated solid state relay output. Output channels are isolated from each other. The output type can be changed to latch or unlatch output with the specified time. The user can configure input polarities, anti-jumper filter time, serial communication port settings and output latch time easily through DIO user interface. User can also turn the “Test Mode” on the module. All the inputs and outputs are adjustable for site tests in the “Test Mode”.
MDIO
Mini DIO (Digital Input/Output) Module can display on/off or 1/0 data for up to 4 channels. Input channels with high impedance reduce the input current and noise immunity is increased through hysteresis. The device has a anti-jumping filter to prevent contact from jumping. The device also has 32 bit change registers and these registers display the level changes in the input channels. Mini DIO (Digital Input/Output) has 3 channels of isolated solid state relay output. Output channels are isolated from each other. The output type can be changed to latch or unlatch output with the specified time. The user can configure input polarities, anti-jumper filter time, serial communication port settings and output latch time easily through Mini DIO user interface. User can also turn the “Test Mode” on the module. All the inputs and outputs are adjustable for site tests in the “Test Mode”.
ESU 101
ESU 101 is s cost-effective environmental sensor which is also equipped with Infra Red (IR) controller for split-type Air Conditioners. Thanks to its flexible design, ESU 101 has a learning mode which enables the device to be used with almost all split-type ACs. It has an RS-485 interface supporting Modbus/RTU protocol for SCADA applications.
ESU 201
ESU 201 is an advanced environmental sensor which is also equipped with Infra Red (IR) controller for split-type Air Conditioners. Thanks to its flexible design, ESU 201 has a learning mode which enables the device to be used with almost all split-type ACs. In addition, it has low power bluetooth communication protocol, therefore it can be controlled via any device that has bluetooth technology.
Wide Range of Use
Cost-effective solutions with precise measurement data, in any environment where IoT-based energy monitoring and management is required.
Plants
Easily integrated
with other software
ecosystems
800+
Power Plants
3 GW+Measurement Points
2000+Installed IoT Devices
Talk To An Expert
Discover how you can benefit from inavitas
products based on your needs.